On Saturday October 31 superyacht Just J’s was ready to be launched in Monnickendam, afterwards she was towed to Oranjewerf in Amsterdam where her mast will be fitted and somefinal work will be done in preparation of the sea trials. She is a 61 metre long motor yacht with steel hull and aluminum superstructure, her elegant profile is in perfect harmony with the exterior spaces.

The guest suites are spread across two decks. One double guest cabin is situated on the lower deck. Four double guest cabins and a VIP suite are located fore on the main deck. All cabins have private en suites with shower, toilet and hand basin. The crew area is located fore of the yacht on the lower deck, seven cabins can accommodate a total of fifteen crew. The generous sized captain’s cabin and office are adjacent to the wheelhouse on the bridge deck.

The deck below bridge deck is completely dedicated to the owners and ensures total privacy. The master stateroom is situated fore of the yacht and has 180° windows for superb views. The generously sized his and hers bathrooms, a his and hers closet, a study and a bar complete this area.
The aft area outside on the main deck a seating area and a large table making it a perfect place for alfresco dining. Inside, the cosy and light salon has comfortable sofas and a dining table at can easily seat up to twelve guests.

The bridge deck has a large outside area aft, with elegant sofa’s and sun loungers, while inside the salon is furnished with another large seating area for guests to relax. The wheelhouse on the bridge deck is equipped with the latest high-tech equipment guaranteeing safe journeys when underway.
Finally, the sun deck is the perfect deck for spending the day in the sun, here there are also several seating areas to choose from. Owners and guests can relax in the sun on one of the sun loungers, cool down in the 3×2 metres swimming pool or look for a cooler place in the shade, there’s something for everyone.

Just J’s is a yacht with an outstanding design. A dream that’s been built to last a lifetime.

Specifications:
Length over all: 61 m
Length WL.: 50.4 m
Beam over all: 11,0 m
Draft: 3.37 m
Main engines: 2 x Caterpillar engines type 3512C
Speed: top 15,5 and cruise 13 knots
Lay-out:
Cabin deck: guest cabin, engine room, tender storage and crew area.
Main deck: salon, galley, lobby and guest cabins.
Owners deck: master suite, lounge and dining area.
Bridge deck: lounge area and wheelhouse.
Sun deck: lounge area, Jacuzzi.

Contact:
Diana Yacht Design BV
Ampèrestraat 13-A
1817 DE Alkmaar
Tel: +31 (0)72 – 5200155
Fax: +31 (0)72 – 5209191
E-mail: info@dianayachtdesign.com
Web: www.dianayachtdesign.com

The 42-meter displacement motoryacht Alive, recently delivered by Heesen Yachts in the Netherlands, is the first luxury yacht equipped with a Hull Vane. After a 30m passenger catamaran and a 55m offshore supply vessel, MY Alive represents the third full-scale application of the fuel saving device called Hull Vane. Full scale test results have proven fuel savings averaging 20% in the yacht’s useful speed range (12-16 knots).

Even without Hull Vane, the hull shape of MY Alive is very fuel efficient, as it is based on the Fast Displacement Hull Form (FDHF) from Van Oossanen Naval Architects, the company where the Hull Vane was originally invented. Model tests at the Wolfson Unit showed unprecedented fuel economy for a yacht of these dimensions – and this was later confirmed at sea.

In November 2014, MY Alive was put to the test during sea trials on the North Sea. As the Hull Vane on MY Alive is integrated into the construction under the swim platform, testing without the Hull Vane was not possible. In July 2014, such back-to-back comparison trials were done on a 55 m Fast Supply Intervention Vessel, confirming the predicted fuel savings for that vessel of 10% at 12 knots up to 15% at 21 knots. The speed trials on MY Alive did however correspond exactly with the predicted resistance curve using computational fluid dynamics (CFD) software and model tests, which showed that the Hull Vane reduces the resistance by 20% at cruising speed. With her pair of 1.080 kW main engines, MY Alive reaches a top speed well over 16 knots.

As the Hull Vane was incorporated into the design of MY Alive from the beginning, it already saved money and space during the build: smaller main engines could be installed for the same top speed and smaller fuel tanks to achieve the same transatlantic range. The Hull Vane is a particularly attractive option for newbuilds, especially large yachts, fast commercial ships and naval vessels, as the cost savings on the main engines often outweigh the cost of the Hull Vane. So for roughly the same overall build cost, a ship can be built with more usable interior volume, significantly lower fuel consumption and better seakeeping in waves.

The main working principle of the Hull Vane is forward thrust: the hydrofoil generates a lift force in the upward flow under the aft ship. As this lift force is angled forward, a net forward thrust force is developed. The Hull Vane sometimes has been called “the bulbous bow of the stern” as it also reduces the stern wave created by the vessel and therefore the energy put into the wave system. Due to the vertical lift, the running trim is also influenced beneficially. As the Hull Vane dampens the pitching, rolling and yawing movements, the savings percentage is higher when sailing in waves, because the added resistance from ship motions is reduced.

The patented Hull Vane is sold exclusively by Hull Vane BV and its appointed sales agents. The Hull Vane is not exclusive to any design office or shipyard. It is suitable for relatively fast ships sailing at displacement or semi-displacement speeds, which corresponds with Froude numbers of 0.2 to 0.7. Besides superyachts, suitable ship types are ferries, naval and coastguard ships, offshore supply vessels, midsize container vessels and small cruise ships.

Hull Vane B.V. maakt vol trots bekend dat de Hull Vane afgelopen week de tweede plaats heeft verworven in de verkiezing voor de ‘Vernufteling Award’, de jaarlijkse prijs voor de meest inventieve uitvinding. Op de foto ziet u de bedenker van de Hull Vane, Piet van Oossanen uitleg geven over de werking van de Hull Vane.

De jury complimenteerde Van Oossanen met het ontwerp van de Hull Vane omdat de aanzienlijke brandstofbesparing een duurzaam antwoord geeft op de groeiende behoefte aan energie-besparing in de maritieme sector. Piet van Oossanen kreeg bijzondere lof voor zijn doorzettingsvermogen in het doorontwikkelen van de Hull Vane in de afgelopen 12 jaar tot een verkoopbaar product. Men vond het ook van groot belang dat de Hull Vane goed exporteerbaar is en al is toegepast op diverse scheeptypen met bewezen resultaten.

De winnende uitvinding was een verticale broeikas-facade voor gebouwen, waarin verse groenten en frisse lucht geproduceerd kunnen worden. De verkozen ‘Ingenieur van het jaar’, Allard van Hoeken, werkt aan een betaalbare getijdenstroomgenerator. Hiermee werden alle top-posities in de ‘Dag van de Ingenieur’ verkiezing ingenomen door een milieuvriendelijke technologie.

De Hull Vane is een brandstof besparende vleugel onder de achtersteven van een schip, waardoor minder weerstand wordt gecreëerd. Afhankelijk van de lengte en snelheid van het schip kan de Hull Vane een brandstofbesparing opleveren van 5 tot 20 procent. Geschikte scheepstypes zijn o.a. ferries, bevoorradingsschepen, superjachten, kustwachtschepen en marineschepen. Het Hull Vane concept is uitgevonden door Piet van Oossanen en sindsdien doorontwikkeld. In 2014 is het door Van Oossanen Naval Architects wereldwijd gepatenteerd in de markt gezet.

De ‘Vernufteling’ wordt jaarlijks toegekend aan een ingenieursbedrijf met het meest vindingrijke project door KIVI, het Koninklijk Instituut Van Ingenieurs. De prijs werd uitgereikt op de ‘Dag van de Ingenieur’ op 18 maart 2015.

Van Oossanen Naval Architects is happy to announce a new commission for the complete naval architecture for a 40m FDHF Motoryacht, by a respected and promising client. This yacht will be part of a series newbuild semi-custom yachts.

Perry van Oossanen, director naval architect, states: “We received this order as a result of our proven concept of the optimized Fast Displacement Hull Form.  We expect to deliver a sporty and efficient design that meets the high end demands of our new client’’.

The build of this Motoryacht will start this summer and the yacht is expected to be delivered early 2017.  With this order, the quality concept of Van Oossanen is entering new and promising waterways.

Dykstra Naval Architects is delighted to announce their latest order for a beautiful 56m / 184ft classic ketch for a client who selected naval architecture and exterior styling to be by Dykstra Naval Architects,  interior design by Mark Whiteley Design and built by Royal Huisman in Holland.

“The owner’s brief was for a stunning looking yacht for family enjoyment,” says Thys Nikkels of Dykstra Naval Architects. “We created a slender hull with long overhangs for an elegant and classic-looking yacht with favorable sea-keeping characteristics that are ideal for worldwide cruising. The generous sail area combined with her ketch rig and modern underwater body with fin keel and spade rudder will assure light air agility to her otherwise all round performance. We might see her in a Bucket regatta, but with below deck stowage planned for numerous toys such as a Laser, kayaks, windsurfers and bicycles she will be as much at home in a secluded bay as on the race course or the high seas.”

Rigged with carbon spars, booms and standing rigging scaled to an air draft that maximizes sail area whilst recognizing the Panamax height limitation, the design details feature oval portholes in the sleek, low profile dark blue hull, a circular skylight around the mizzen mast that promises to flood the owners suite with an abundance of natural light, and for added social amenity, A mid deck lounge area with sun canopy above. Whilst many details are yet to come, the yacht adds further distinction, having acres of uncluttered teak decking, a 6.2m / 20ft jet drive tender, large 3m / 10ft side boarding platform and twin helms socially connected to the large shaded main cockpit that adjoins an even larger glass rimmed deck salon at its forward end.

‘The interior will compliment her elegant profile and traditional lines with beautiful raised and fielded white painted paneling trimmed with an elegant but simple profile of fine varnished timber, says designer Mark Whiteley. “The brief called for a relaxed home afloat for the owner’s family and friends, and aside from a split-level master cabin featuring a private deckhouse and cockpit, the accommodation includes a large deck salon, three en-suite guest cabins, a media room and even a dedicated fully equipped gym. One cabin will serve as a bunk-room for the owner’s extended family with twin beds that can convert to a Queen double with a set of Pullman berths above. The gymnasium too will have an optional Pullman fitted. “

Due for delivery to her owners in the autumn of 2017, the yacht represents a collective ensemble of designers, project manager and builder, whose skill sets are being elevated by the encouraging ideas of a very thoughtful husband and wife team. Following delivery it will no doubt be an exciting maiden voyage for her as she pursues the trade wind sailing made famous in the Windward and Leeward islands of the West Indies.

Natuurlijk heeft u een idee over uw volgende boot en vanzelfsprekend weet u ook precies hoe zij eruit gaat zien, de ideale indeling en welke vaareigenschappen ze moet hebben. Uw nieuwe boot hoeft kortom alleen nog maar getekend en gebouwd worden. U kunt natuurlijk zelf uw CAD/CAM programma opstarten en uw nieuwe boot tekenen, maar dat is natuurlijk niet verstandig. Dit is werk van een professional. Maar wie? Hier vindt u een aan aantal handvatten zodat zeker weet dat u de juiste ontwerper voor u nieuwe boot kiest.